Product Overview
Fleetguard WF2072 DCA4 Coolant Filter
Genuine Fleetguard WF2072 DCA4 chemical coolant filter combines cooling-system filtration with supplemental coolant additive (SCA) delivery to help maintain proper coolant protection. The WF2072 uses DCA4+ pellet additive technology and is designed for rehabilitating ES Compleat® or similar coolant technology. It cross-references Donaldson P552072, Baldwin BW5072, NAPA 4072, Wix 24072, Carquest 89072, Luber Finer LFW4072, Cummins 3100305, and numerous additional equipment manufacturer part numbers listed below.
Fleetguard WF2072 DCA4 Coolant Filter Cross References
| Manufacturer or Brand | WF2072 Cross-Reference Part Number |
|---|---|
| Fleetguard | WF2072 |
| Donaldson | P552072 |
| Baldwin | BW5072 |
| NAPA | 4072 |
| Wix | 24072 |
| Carquest | 89072 |
| Luber Finer | LFW4072 |
| Furukawa | 1257937H1 |
| Volvo Construction Equipment | M12968028 |
| Irlemp | PW2072 |
| Tec-Fil | PSA272 |
| Mack | 5839WF2072, 2191P552072 |
| Aveling Barford | SW603106 |
| BMC Trucks | 9P900265 |
| Cummins | 1333538, 1303538, 3318201, 3305368, 3300900, 3300724, 3100305 |
| Fiat Hitachi | 83972259 |
| Liebherr | 7381493, 456000736 |
| Hough | 1257937H1 |
| AG Chem Equipment | 710195 |
| Motorcraft | FW17 |
| Orenstein & Koppel | 1448927 |
| Dongfeng Motor | C3100305 |
| Ford | E7HT8A424BA, E7HZ8A424A |
| Dressta | 1257937H1 |
| New Holland | 83972259, E7HT8A424BA, 83987767, 83957719, 84557551 |
| AGCO | AG710195 |
| Alliance | ABPN10GWF2072 |
| Caterpillar | 3I1289, 1112371 |
| Euclid-Hitachi | E12968028 |
| Manitou | 4136120 |
| John Deere | F434679 |
| Ingersoll-Rand | 59221457 |
| SDMO | 330560515 |
| Scania | LO1753 |
| Bosch | 9455085026 |
| Komatsu | 1257937H1, CUWF2072, 6742013970 |
| JCB | 2912212 |
| Ford Finiscode | 3957719 |
| Volvo | VOE129680286, 8228958, 12968028, 129670204, 129680286 |
Genuine Fleetguard WF2072 Filter Features
- DCA4+ coolant additive: Contains DCA4+ supplemental coolant additive designed to help maintain proper cooling-system protection.
- Cooling-system filtration: Provides coolant filtration while simultaneously delivering supplemental coolant additives into compatible cooling systems.
- Pellet additive form: Uses DCA4+ coolant additive in pellet form for controlled additive delivery.
- Coolant rehabilitation: Designed for use in rehabilitating ES Compleat® or similar coolant technology.
- Genuine Fleetguard coolant protection: Fleetguard DCA4 chemical water-filter technology combines filtration and SCA delivery in a single service filter.
Fleetguard WF2072 DCA4 Coolant Filter Specifications
| Filter Specification | Measurement or Value |
|---|---|
| Filter Type | DCA4 chemical coolant / water filter |
| Thread Size | 11/16-16 UN-2B |
| Additive Base | DCA4+ |
| Chemical Additive | DCA4+ |
| Coolant Additive Form | Pellet |
| Height | 4.16 in / 105.66 mm |
| Largest Outside Diameter | 3.67 in / 93.22 mm |
| Seam Outside Diameter | 3.69 in / 93.73 mm |
| Gasket Outside Diameter | 2.83 in / 71.88 mm |
| Gasket Inside Diameter | 2.46 in / 62.48 mm |
Cross-reference numbers are provided for identification purposes. Always verify filter compatibility using the original filter part number, engine or equipment application, coolant type, cooling-system configuration, and filter specifications before placing an order.
⚠️ California Proposition 65 Warning: This product can expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.
