Product Overview
Isuzu 8982465060 8982465063 NOx Sensor
OUT OF STOCK UNTIL 10-13-2026 - See Skyline ANX301 Alternative
Restore Isuzu aftertreatment-system performance with this premium Dinex 2nd Generation aftermarket Nitrogen Oxide (NOx) sensor. Dinex 2HN003 is designed as a direct-fit replacement for the high-priority Isuzu OEM numbers 8982465060 and 8982465063, along with 8982465061, 8982465062, 98246506, and their applicable hyphenated Isuzu service-number formats listed below. Designed for compatible Isuzu EPA21 aftertreatment systems, Dinex 2HN003 is backed by an industry-leading 2-Year Unlimited Mileage Warranty.
Isuzu 8982465060 8982465063 NOx Sensor Cross References
How to Verify Your Unit: Match the Isuzu OEM, Continental/VDO, Dinex, or aftermarket number on the original NOx sensor or control module to one of the cross-reference numbers listed below before ordering.
| Manufacturer / Reference | Interchange Part Numbers |
|---|---|
| Isuzu 8982465060 | 8982465060, 8-98246-506-0 |
| Isuzu 8982465063 | 8982465063, 8-98246-506-3 |
| Isuzu 8982465062 | 8982465062, 8-98246-506-2 |
| Isuzu 8982465061 | 8982465061, 8-98246-506-1 |
| Isuzu OEM Reference | 98246506 |
| Continental / VDO | 5WK97210, 5WK9 7210 |
| Dinex | 2HN003 |
| Skyline | ANX301 |
Compatible Isuzu Engines and Truck Applications
Dinex 2HN003 is designed for applicable Isuzu commercial trucks using the matching 8982465060 / 8982465061 / 8982465062 / 8982465063 NOx sensor family. The sensor family is used across Isuzu 4JJ1 and 4HK1 diesel applications, depending on vehicle configuration and emissions system.
- Isuzu 4JJ1: Applicable 3.0L diesel configurations using the matching OEM sensor family
- Isuzu 4HK1: Applicable 5.2L diesel configurations using the matching OEM sensor family
- Isuzu NPR: Applicable configurations using the matching OEM sensor number
- Isuzu NPR-HD: Applicable configurations using the matching OEM sensor number
- Isuzu NPR-XD: Applicable configurations using the matching OEM sensor number
- Isuzu NQR: Applicable configurations using the matching OEM sensor number
- Isuzu NRR: Applicable configurations using the matching OEM sensor number
- Isuzu FTR: Applicable 4HK1-powered configurations using the matching OEM sensor family
- Sensor Position: Inlet or outlet depending on the exact Isuzu application and OEM sensor revision
- Electrical System: 12 Volt
- Connector: 5-pin
- Emissions Standard: EPA21
Fitment Verification: Isuzu NOx sensor applications can vary by engine, truck model, production year, emissions configuration, sensor position, connector type, cable length, and control-module calibration. Always verify compatibility using the exact OEM number stamped on the original sensor or control module, vehicle identification number (VIN), or official Isuzu service information before ordering.
Dinex 2nd Generation Isuzu NOx Sensor Specifications
| Product Type | Nitrogen Oxide (NOx) Sensor |
| Dinex Part Number | 2HN003 |
| Primary OEM Number | 8982465060 |
| Sensor Technology | Dinex 2nd Generation |
| Sensor Position | Inlet or Outlet — Verify Exact OEM Application |
| Voltage | 12V |
| Connector | 5-Pin |
| Exhaust Emission Norm | EPA21 |
| Length | 185.00 mm (7.28 inches) |
| Width | 122.00 mm (4.80 inches) |
| Height | 60.00 mm (2.36 inches) |
| Net Weight | 0.40 kg (0.88 lb) |
| Warranty | Industry-Leading 2-Year Unlimited Mileage Warranty |
Important Fitment Note: NOx sensors can vary by engine, vehicle configuration, model year, emissions system, sensor position, connector type, cable length, and software calibration. Always match the replacement sensor to the exact OEM number stamped on the original sensor or control module, or verify compatibility using the VIN and official Isuzu service information before purchasing. Product images and technical drawings are for reference only.
California Proposition 65 Warning: WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer or reproductive harm. For more information go to www.P65Warnings.ca.gov.
